| Technical Support
More features
Time Change
Lucent
* work on operator's station
1) Press Feature 0 0, press left intercom button twice, press # 101
2) Enter today's date in the form mmddyy(month, day and year),
including leading zeros for single-digit months or days. For example,
to enter April 26,1997 press 0 4 2 6 9 7. A display similar to the following appears:
System Date
Data 042697
3) Select another procedure or exit programming mode.
NEC 2000
* work on operator's station
1) Press TRF CONF *
2) Press TRF CONF #
3) Press Redial
4) Press 02 Recall
5) Press 2 Recall
6) Press Current time Recall
Note: Current time = HHMMSS (military time)
7) Press Conf
8) Hang Up
NEC Elite
* work on operator's station
1) Press Feature 9 #
2) Dial current time(e.g. 03:29)
3) Press Recall to toggle AM/PM
4) Press Hold to advance to the calendar
5) Press Recall to select the day of the week
6) Dial # to move the cursor to the day of the month setting
7) Enter the day using the dial pad(0 ~ 9)
8) Press Recall to select the month
9) Dial # to move the cursor to the year setting
10) Enter the last two digits of the year using the dial pad(0 ~ 9)
11) Press Feature
Panasonic DBS
* work on operator's station(e.g. ext. 100)
1) ON/OFF PROG ##("Program Mode' is displayed on line 1, "MAIN MODE" on line2)
2) FF1("System Program" is displayed on line 1, "SELECT SUB MODE" on line2)
3) 1#("SELECT TIME MODE" is displayed on line 1; "1:DATE 2:TIME" on line2)
4) 1#("DATE SET MODE" is displayed on line 1; "MONTH/DAY/YEAR" on line2)
5) MMDDYY(Enter new date in MMDDYY format)
6) # ON/OFF(to store the program change and exit programming mode; the new date should now be displayed on all LCD phones)
Lucent Merlin Legend
* work on operator's station(MLX 20)
1) menu/sys program
2) exit
3) system
4) time
5) back space out old time and enter new time in military format
6) enter
Norstar Merdian
1.Press Feature.
2.Enter "**8463".
3.Enter the password (default is 266344).
4.The display shows
Hour: 01
Next Change
5.Select CHANGE. Display shows:
Hour: __
Cancel
6.Enter two digits for the hour. Chose AM or PM when Prompted.
7.Select NEXT.
The display shows:
Minutes: 00
Next Change
8.Enter the minutes.
9.Press the RLS button to end, or press NEXT to change the date.
10.The diplay shows:
Year: 99
Next Change
11.Enter the two-digit year.
12.Select NEXT and repeat to change the month and day.
13.Press the RLS key to save the time and date and exit
programming.
Norstar Meridian CICS
Time
Press "FEAT".
Press "*".
Press "*".
Press "266344" (CONFIG) or "23646" (ADMIN).
Enter password "23456" (ADMIN) or "72787" (SCPLUS).
You will see "Terminals & Sets".
Press "Next" five times.
Press "Show"
When you see "Hour", press "Change" or "Next" to skip.
Type in the hour using military time as a 2 digit number.
Press "Next".
When you see "Minutes", press "Change" or "Next" to skip.
Type in the minutes using a 2 digit number.
Press "Next".
Date:
When you see "Year", press "Change" or "Next" to skip.
Type the year in 2-digit format.
Press "Next".
When you see "Month", press "Change" or "Next" to skip.
Type the month in 2-digit format.
Press "Next".
When you see "Day", press "Change" or "Next" to skip.
Type the day in 7-digit format.
Press "Next".
When you see "End of List", Press "Rls" to exit.
Nortel Norstar Telephone Systems
Changing the time on a Norstar system must be done using a display
phone. Using a M7310 or T7316
the right 2 buttons under the
display are "NEXT" and "SHOW" respectively.
1.To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2.Enter password (default = 266344) - display should read "Terminals
& Sets"
3.Press "NEXT" 5 times - display should read "Time and Date"
4.Press "SHOW" - display should read "Hour:___"
5.Press softkey "CHANGE"
6.Enter hour - display should read "AM OK or Change"
7.Select AM or PM
8.Press "NEXT" - display should read "Minutes:___"
9.Press softkey "CHANGE"
10.Enter minutes
11.Press "NEXT" - display should read "Year:___"
12.Press softkey "CHANGE"
13.Enter year
14.Press "NEXT" - display should read "Month:___"
15.Press softkey "CHANGE"
16.Enter month
17.Press "NEXT" - display should read "Day:___"
18.Press softkey "CHANGE"
19.Enter day
20.Press "NEXT"
Telephone No.: (510) 252-9688
Toll-Free: 1-800-817-6688
E-mail: service@vicomptelusa.com |
